Why October Is the Time to Think About Your Heat
In Memphis, the first cool mornings tend to show up while the afternoons still feel like summer. That in-between stretch is the easiest moment to get your home ready for heating season, because nobody is shivering yet and nothing is urgent. If the furnace or heat system only gets attention on the first cold night, any problem it has shows up at the worst possible time.
Our team handles heating and air conditioning service for homes, and the question we like homeowners to ask in the fall is simple: will the system do its job when the cold arrives? You do not need to know the answer yourself. You only need to notice what the system is doing and tell us.
What Getting Ready Actually Involves
Turn the heat on before you need it
Run your system for a short stretch on a mild day. Set the thermostat to heat and let it cycle. You are checking that it starts, that warm air actually comes out of the vents, and that it keeps going until the house reaches the temperature you set. Doing this in October means a problem becomes a scheduled visit, not an emergency.
Check the thermostat and the basics
Make sure the thermostat responds when you change the setting and that the display is working. Look at the vents in each room and make sure furniture, rugs or boxes are not blocking them. Blocked airflow makes any system work harder and leaves rooms uneven.
Look at the air filter
A dirty filter is one of the most common reasons a home feels stuffy or a system seems to struggle. If yours looks clogged, swap it for a fresh one. If you are not sure what size or type your system takes, ask us and we will explain it.
Keep the outdoor unit clear
If your system has an outdoor unit, leaves tend to collect around it in fall. Keeping the area around it tidy helps with airflow. Switch the system off before you clear anything close to the unit, and call us if you are unsure about anything you see.
What to Watch and Listen For
When you test the system, pay attention to what it tells you. These are worth a phone call:
- The system does not start, or starts and shuts off quickly
- Rooms that stay noticeably colder than the rest of the house
- Unusual noises when the system turns on or while it runs
- Smells that you do not normally notice when the heat comes on
- A thermostat that does not match how the house actually feels
A brief, mild burnt-dust smell the first time heat runs after a long break is something many people notice. If a smell is strong, lingers, or worries you, turn the system off and call us.
Heating and Cooling Are One System
Fall is also when a house is still switching back and forth. One afternoon you want cooling, the next morning you want heat. That is a good reason to look at the whole setup together rather than treating air conditioning and heating as separate worries. Our HVAC services cover heating and air conditioning service for homes, so one call lets us look at what your system is doing in either direction.
What Happens When You Call Us
We keep the process plain. You tell us what the system is doing and where you are. We talk it through and explain what we think is going on and what the work would involve. If work is needed, our team handles it and keeps you posted as it moves. Then we check with you that your home is back to the temperature you want. Our phone is open 24/7 at (901) 480-2363, so a cold snap does not have to wait for business hours.
Serving Memphis and the Cities Around It
We work with homeowners in Memphis, Bartlett, Germantown, Collierville, Arlington and the cities nearby. If you are not sure whether we cover your address, call and tell us where you are and we will confirm we can get to you.
A Simple Fall Plan
Test the heat on a mild day, check the filter and vents, clear leaves from around the outdoor unit and note anything that seems off. If something does, send us a message or call, and we will help you sort it out before the cold settles in. Honest, reliable service is what we are here for, and fall is the easiest season to put it to use.
